fxload - EZ-USB utility program

Distribution: ROSA 2014.1
Repository: ROSA Main x86_64
Package name: fxload
Package version: 2002_04_11
Package release: 16-rosa2014.1
Package architecture: x86_64
Package type: rpm
Installed size: 44.78 KB
Download size: 23.31 KB
Official Mirror: mirror.rosalab.ru
This package contains utilities for downloading firmware to EZ-USB devices. EZ-USB devices use 8051-based microcontrollers that have been enhanced with registers, buffers, and other device-side support for USB transactions. It currently supports devices based on the Anchorchips EZ-USB, as well as the Cypress EZ-USB FX (which is almost completely source compatible) and EZ-USB FX2 (which is not). All of these support full speed (12 Mbit/sec) transfers. The FX2 also supports high speed (480 Mbit/s) transfers, introduced in USB 2.0. This version of FXLOAD supports optional use of two-stage loading, where special device firmware is used to support writing into off-chip memory such as RAM (when firmware neeeds more than about 8 KBytes of code and data) or, for firmware development, I2C serial EEPROM.



  • fxload == 2002_04_11-16:2014.1

    Install Howto

    1. Enable ROSA Main repository on Install and Remove Software"
    2. Update packages list:
      # urpmi.update -a
    3. Install fxload rpm package:
      # urpmi fxload


    • /sbin/fxload
    • /usr/share/doc/fxload/COPYING
    • /usr/share/doc/fxload/README.txt
    • /usr/share/man/man8/fxload.8.xz
    • /usr/share/usb/a3load.hex


    2014-06-27 - Alex Burmashev <alex.burmashev@rosalab.ru> 2002_04_11-16 + Revision: 01de844 - MassBuild#440: Increase release tag